ABOUT/HOW IT WORKS     HISTORY/DEVELOPMENT     INSTRUCTIONS/CARE     ORDERING/CONTACT

 

Instructions/Care

  1. 1.Place the candle in the bottom of a standard pint glass and light it.


2. Place the metal Vaportini ring on the top of  the glass, making sure that it is secure.


3. Place the Vaportini globe on top of the ring with the opening facing up.


4. Place the funnel into the opening of the globe and add 1-1.5 ounces of spirits to the globe. Spirits with a proof of 80-100 works best. Check our website for suggestions.

Note: do not fill/refill the globe while hot.

5. Allow the spirits to heat for approximately 4-5 minutes. A clear vapor will begin to appear.


6. Insert a small straw into the opening of the globe making sure it is above the liquid. Inhale deeply, hold the vapors for a few seconds and exhale. Only the alcohol vapors should be consumed.


7. Enjoy responsibly.

The Vaportini components are easy to clean and maintain. The Vaportini ring is stainless steel and will never rust, it can be cleaned with standard dishwater or wiped with a damp towel. After the alcohol is consumed from the globe, liquid will remain, simply invert the globe allowing the liquid to flow out. By gently touching the opening, all of the liquid will be removed. The globe can then be cleaned with

the same solutions as any other glass. In a restaurant/bar setting, add the solutions from the 3-chamber sink individually, emptying the Vaportini globe after each one.


For the home consumer, add a mild dishwater solution, empty and rinse. The Vaportini globe should be dried with the opening at the bottom allowing excess water to drain. This can be accomplished by placing it on a glass or on the Vaportini ring. The funnel just needs to be rinsed. The straws are disposable, any straw will work. The candle is a standard tea light, but small gel candles will work also.